This precision analyzer has
a range from 0 to 10%. It is typically used to determine the CO2
concentration in respired gases or gas mixtures from collection bags, or
other sources. May be adjusted to 0 to 15% CO2 on request.
concentration is displayed on a digital meter and a corresponding analog
voltage is available on a rear panel BNC connector.
Photo also shows companion
Not intended for clinical
use, for teaching or laboratory use only
A gas pump is built in to
draw the gas through the analyzer. Gas flow is internally adjustable. Adjustment may affect response time. A gas return port may be installed on request at no charge.
Precision gas mixtures are
available for calibrating the analyzer.
See also: Last Updated: 13 Dec 2016
|| 0 - 10%
|| +/- 0.01%
| Zero Drift
|| Less than 1.5 torr in 1 hour
0 - 5 Volt = 0 to 10% CO2
| Meter Display:
|| 200 ml/minute
| Response Time:
|| 120 milli-seconds typical
| Operating Temperature
to 40o C
| External Power Supply:
|| 100 -
250 VAC, 50/60 Hz (Included), 0.5 Amp at 115VAC
|| 30 minutes
to 0.1% CO2
2.75" (70 mm) Height x 6.3" (155 mm) Width x 10" (255 mm) Depth
| Drying Column:
Nafion semi-permeable membrane brings sampled gas to ambient humidity.
No chemical dryer required.
| Gas Sample Inlet: