This precision analyzer has a range from 0 to 100%, other ranges are available on request. It is typically used to determine the O₂ concentration in respired gases or gas mixtures from collection bags, or other sources.

The oxygen concentration is displayed on a digital meter and a corresponding analog voltage is available on a rear panel BNC connector. A gas pump is built in to draw the gas through the analyzer. Gas flow is internally adjustable. A gas return port may be installed on request. Precision gas mixtures are available for calibrating the analyzer.

O₂ sensor is guaranteed for 3 years. Easily replaced by user.

Photo also shows companion CO₂ analyzer. Specifications
Not intended for clinical use, for teaching or laboratory use only

Type:	Cold, Dry Fuel Cell
Estimated Life:	3 years minimum
Range:	0 - 100%
Repeatability:	0.2% O2
Resolution:	0.1% O2
Zero Drift	0.3% O2/week (at constant temperature)
Output:	0 - 5 Volt = 0 to 100% O2
Meter Display:	4-1/2 digit LED  (0.00 to 100.00)
Flow Rate (Nominal):	200 ml/minute
Response Time:	Approx. 5 seconds
Operating Temperature Range:	10o to 40oC
External Power Supply	100 - 250 VAC, 50/60 Hz (Included), 0.3 Amp at 115VAC
Warm-up:	30 minutes to 0.1% O2
Size:	2.75" (70 mm) Height x 6.3" (155 mm) Width x 10" (255 mm) Depth
Drying Column:	Nafion semi-permeable membrane brings sampled gas to ambient humidity. No chemical dryer required.
Gas Sample Inlet:	Front Panel

1 year warranty, details in FAQ

Last Updated: 1 Jun 2022

---